Skip to content

New

Experience the new and improved sleep and Sound

How to Insert Earplugs Correctly

1

Roll

With clean, dry hands, roll the earplug between your thumb and forefinger until it compresses into a tight, crease-free cylinder.

2

Pull

Reach over your head with your opposite hand and pull your ear up and back to straighten the ear canal.

3

Insert

Gently insert the compressed foam earplug into your ear canal with a slight twisting motion while it's still compressed.

4

Hold

Hold in place for 10–15 seconds while the foam expands to fill the canal and create a seal.

5

Check the seal

The earplug should sit flush with or slightly inside the ear canal entrance — not protruding.

1

Warm

Roll the silicone putty between your fingers until soft and pliable.

2

Flatten

Shape into a small flat disc.

3

Press

Press gently over the ear canal opening to form a seal. Do not insert into the canal.

4

Remove

Peel away gently after use.

1

Hold

Hold the earplug by the stem with one hand.

2

Pull

Use your other hand to pull your ear up and back.

3

Insert

Insert narrow tip first into the ear canal with a gentle twisting motion. The stem remains outside the ear.

4

Adjust

Gently adjust depth for comfort and seal.

5

Remove

Pull out slowly by the stem with a slight twisting motion.

Good Fit vs Not a Good Fit

Good Fit

  • Sits flush with or slightly inside the ear canal
  • Noise is noticeably reduced
  • Feels snug but comfortable
  • Stays in place when you move
  • Can still hear important sounds

Not a Good Fit

  • Protrudes from the ear
  • Noise reduction is poor
  • Feels painful or causes pressure
  • Falls out easily
  • Causes itching or irritation

Frequently Asked Questions

Roll the earplug tightly, pull your earlobe up and back to straighten the ear canal, insert with a slight twisting motion, and hold for 10–15 seconds while the foam expands. A proper seal sits flush with the ear canal entrance — not protruding.

No — earplugs reduce noise but don't eliminate it entirely. The body absorbs sound through the skull as well as the ears, so complete silence isn't possible with passive earplugs. High NRR earplugs like Macks Snore Blockers (NRR 32) provide the highest practical level of passive noise reduction.

Foam earplugs insert into the ear canal and offer higher noise reduction ratings (NRR 29–33). Silicone earplugs mould over the ear canal opening — they're more comfortable for some people and fully waterproof, but typically offer lower noise reduction. For sleeping, foam is usually more effective; for swimming, silicone is the better choice.

Soft foam earplugs with a high NRR are the most effective for blocking snoring. Macks Snore Blockers (NRR 32) are our top recommendation. For a reusable option, Alpine Sleep Deep is designed specifically for maximum noise blocking during sleep.

Hold the earplug in place for at least 10–15 seconds. Letting go too early is the most common reason earplugs don't seal properly. The foam needs time to expand and fill the contours of your ear canal.

The most common causes are: not rolling tightly enough before insertion, not pulling the ear up and back, letting go before the foam fully expands, or using the wrong size. If you've corrected all of these and still have poor noise reduction, try a higher NRR earplug.

Earplugs should feel snug but not painful. If they fall out easily, they may be too small. If they cause pressure or pain, they may be too large. Standard earplugs suit most adults; smaller options like Macks Slim Fit or Macks Dreamgirl are designed for narrower ear canals.

Yes, when inserted correctly and replaced regularly. Foam earplugs are single-use — reusing them reduces effectiveness and hygiene. For nightly use, a reusable option like Alpine Sleep Deep is more practical and cost-effective.